Fast guide to  Smarty’s special Features

  • CaTCHER software's inside
  • Ten different  performance levels.
  • Fastest download in the industry, up to three times faster than
    the competition, a typical ECM update takes about 3.5 to 4.5
    minutes, depending on the truck model.
  • ABS tire height updates in just few seconds.
  • Not traceable in the stock setting. Smarty leaves no footprint.
  • Cold weather 3 Cylinder High Idle is enabled in all softwares .
  • Reads  Diagnostic Trouble Codes in plain text.
  • No tools required, no fuses to pull.
  • USB built in for simple updates .
  • Most complete keyboard in the industry.
  • Reliable, it works off your OEM hardware.
  • Programmable Speed Limiter from 25 to 250 mph
Click to enlarge

Smarty back side quick info
Note:
The production of Smarty S-04 has been
discontinued because the new model S-06
covers completely this one.
Anyway the upgrade software production
and download is guaranteed as for the
other Smarty models

    Fast guide to Smarty's software levels

    The horsepower settings. except #0, all other softwares have a
    modified "Torque management" ( TQM ). The throttle response
    is greatly improved but is set to a save limit. With "Save" I mean
    save for your tranny and rest of the driveline.

  • SW # 0 : Half power
  • SW # 1 : 30 Hp increase, with added timing .
  • SW # 2 : 60 Hp increase, no added timing.
  • SW # 3 : 60 Hp increase, with added timing.
  • SW # 4 : 90 Hp increase, no added timing.
  • SW # 5 : 90 Hp increase, with added timing.
  • SW # 6 : 130 Hp increase, no added timing.
  • SW # 7 : 130 Hp increase, with added timing.
  • SW # 8 : 170 Hp increase, no added timing.***
  • SW # 9 : 170 Hp increase, with added timing.***

    Tested on stock trucks on a Mustang Dyno.
    Stock means just that. Stock! Even the air filters were stock...

    The trucks were S T O C K, even the wastegate settings!
    We checked the "baseline" ( the stock truck Hp at the rear
    wheels ) twice in a day in order to be sure about our findings.
    The above declared HP numbers are all rounded down to the
    closest number. For example the 90 Hp file actually did 96 Hp.
    That's a 90 Hp software for me, not a 100. The 170 Hp was 174.

    No trace is left in the ECM!
    I herby CLAIM that SmartyCR is the FIRST AND ONLY
    downloader that does not erase any of the stored data in the
    ECM. Smarty does NOT leave any electronic footprints in the
    ECM or any other electronic module in the truck. Smarty does
    NOT set ANY codes once the ECM is set back to stock. Smarty
    does NOT need to have fuses pulled.

    No matter what the competition claims , in one way or another
    they're ALL detectable.
    Smarty is NOT!

    Yet, Smarty can not do one thing for you. Fix what others have
    broken. Smarty can not restore a key on counter that another
    downloader has erased . Smarty can not fix VIN# troubles
    caused by other products. If your Check engine / ABS light is
    on because another product has screwed your ECM, Smarty
    can not fix it, the other guy HAS to...

    ABS / Speedo recalibration
    The tire height can be adjusted up to 44" in increments of 10
    tenth of an inch in just a couple seconds. Of course, Smarty
    needs to be VIN# locked to the truck in order to get into the
    ABS adjustment section.

    DTC Code reader
    The name says it all.
    You can read and erase codes. Codes are displayed also in
    plain English. That's old news by now. Smarty S-03 was the first
    one to provide that utility, others found the idea to be a good
    one too.  
    ( Smarty does erase ABS codes too but does not display them )

    ECM update speed
    Faster than anything else on the market! Again we've done our
    homework on the protocol. Less than 5 minutes. Three times
    faster than a Star-Scan diagnostic tool or competitor.

    We have developed our own bootloader in order to not have to
    pull fuses should an update become interrupted for any
    reason. All you have to do is to turn the key off / key on Smarty
    does everything else on it's own.

    Updates
    The CaTCHER softwares as they are today are only a starting
    point. Expect major news in future. We’re for your feedback,
    opinions, likes, dislikes...
    We will make Smarty do what YOU want, TOGETHER.
Smarty S-04 for Dodge Cummins Turbodiesel 5.9L (2003 - 2005.5)