IMPORTANT!
The TNT software you are about to access IS DANGEROUS
to the stock engine and drivetrain!
|
The TNT software has been written for trucks with extensive modifications!
The horsepower levels start around 100 Hp on CaTCHER # 1 and reach 230 additional Hp on
CaTCHER # 9.
These HP gains are referred to a “close to stock” engine but depending on your modifications can
be more. With correctly modified and tuned engines we have seen gains in the 400+ Hp range
above the stock software. On the higher settings a stock engine can NOT take full advantage of it
because the fuel and air supply from the stock parts are simply not enough.
Aftermaket, turbo, injectors, lift pump, injection pump, automatic transmission AT LEAST are
required!
Also a good insurance against valve float at high boost levels is a good set of stiffer valve springs.
If you need valve springs or not, depends upon several factors like max boost pressure reached,
rev range and of course the mileage of the stock springs.
|
|
|
|
Do not download these softwares until you have read the following agreement.
This agreement sets forth the terms and conditions for the use of these softwares.
The installation of these softwares indicates that the buyer has read and understands this agreement and accepts the
terms and conditions.
DISCLAIMER OF LIABILITY
MADS, it’s distributors, jobbers and dealers ( hereafter Seller ) shall be in no way responsible for the product’s proper
uses and service. THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS.
The buyer acknowledges that he is not relying on the Sellers skill or judgement to select of furnish goods suitable for
any particular purpose and that there are no liabilities which extend beyond the description on the face hereof, and the
buyer hereby waivers all remedies or liabilities expressed or implied, arising by law or otherwise ( including without any
obligation of the seller with respect fitness, merchantability and consequential damages ) whatever or not occasioned
by the sellers negligence.
The Seller disclaims any warranty and expressly disclaims any liability for personal injury and damages. The buyer
acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement
and the buyer agrees to indemnify the Seller and to hold the Seller harmless from any claim related to the item of the
equipment purchased. Under no circumstances will the seller be liable for any damages or expenses by reason of use
or sale of any such equipment.
The Seller assumes no liability regarding the improper installation or misapplication of its products.
It is the installers responsibility to check for proper installation and in doubt contact the manufacturer.
The buyer is solely responsible for all warranty issues from the manufacturer.
|
|
|
